Zircon - StudSensor Pro SL-AC

Find studs safely. Don't drive a nail into a live electric wire! The StudSensor™ SL-AC automatically detects hot AC wiring up to 3 inches deep whenever you use it to find studs. With StudSensor Pro SL, it's easy to hang pictures, mirrors, cabinets, and shelves securely. Find studs first and do the job right--without guesswork. No need to make exploratory holes to find studs. Studsensor Pro SL can find wood or metal studs behind walls, floors, or ceilings in either normal or DeepScan mode. DeepScan gives you more sensitivity if your walls are extra thick (up to 1-1/2 inches). Only Zircon stud finders have the Spotlite® Pointing System that locates the edges of the stud with a bright beam of light. StudSensor Pro SL is built tough to withstand daily jobsite use, and is built ergonomically to fit comfortably in your hand.

Features:

• Finds both wood and metal studs
• Select between 3/4" scan depth and patented 1 1/2" DeepScan mode
• Patented SpotLite Pointing System, audio signal, and LEDs indicate stud edges
• Patented TruCal instant calibration
• Recessed LEDs for durability
• WireWarning® lets you know you're working safe
• Continuously detects and warns of hot AC wires
• Detects the presence of unshielded, hot AC wires in all modes for safety
• Locates standard household 120/240V AC wiring
• Find wires in plastic conduit or NM wire
• Exclusive SpotLite® Pointing System shines a bright beam of light over stud edges
• New updated industrial design
• Made tough to withstand daily jobsite use
• Non-marring wall pads
• 9V battery included

Applications:

• Installing plasma and LCD mounts
• Installing wall or ceiling mounted projection screens
• Hanging pictures and mirrors
• Installing plant hangers, pot racks, etc.
• Installing cabinets and shelves
• Installing ceiling fans

Specifications:

• Dimensions: 6.07" H x 2.7" W x 1.18" D
• Weight: 5.7 oz
• Battery type: 9-V (included)
• Estimated battery life: 1 year at 10 minutes/day with alkaline battery
• Wood stud position accuracy: Typically within 1/8" using dual scan and mark procedure, 3/16" in DeepScan mode
• Metal stud position accuracy: Typically within 1/2" using dual scan and mark procedure
• Depth: Typically up to 3/4" in StudScan mode, 1 1/2" in DeepScan mode
• AC position accuracy: Typically 90-250V at 50-60 Hz within 6 inches of hot unshielded wire
• AC sensing depth: In typical drywall with NM wiring, wires can be detected up to 3 inches deep
• NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc.
• Operating temperature: 20° to 120°F
• Storage temperature: -20° to 150°F
• Humidity: 80% RH (non-condensing)
• Water resistance: Splash and water resistant, not waterproof

Pro SL-AC StudSensor Installation Instructions