750 to 1250 SCFM POSPG Series Oil/Water Separator
This POS1251PG model is effective in all compressed air systems, it requires no electricity and operates with all makes of compressors. It receives condensate discharged by intelligent drains, timed solenoid drains, manual drains or float style drains. Premier POS Oil/Water Separators remove over 99% of oil content (mineral, synthetic, semi-synthetic, and polyglycol) and stable emulsions from the condensate discharge of a compressed air system. Replaceable filter element bags trap lubricants but allow water to pass through the POS separator. The conditioned water meets stringent EPA guidelines and conforms to local and State codes. This premier POSPG Series model separates polyglycol, also This multi-tower unit is made of seamless molded-plastic construction that will not crack or leak while removable lids provide easy access for periodic element replacement. Installation requires positioning of the unit for efficient collection of condensate from all sources, and connection to inlet and outlet piping. If you choose to add POS EXTPG it will provide you with an additional carbon finishing that doubles the condensate processing capacity of this Two Tower model. Premier products are proudly made in the USA.
Features:
- Operates with all makes of compressors
- Requires no electricity
- Receives condensate discharged by intelligent drains, timed solenoid drains, manual drains or float style drains
- Easy installation and maintenance
- Two Towers
Specifications:
- Air Compressor Capacity: 750 to 1250 SCFM
- Oil Adsorption Capacity: 6 Gallons
- Connection Size:
- Inlet (Qty): 1/2" (4)
- Outlet: 1/2"
- Element Type:
- Tower 1: Absorption
- Tower 2: Carbon Finishing
- Application: Polyglycol, ATF
- Dimensions: 39" H x 15" W x 44" D
- Weight: 130 lbs
POS EXTPG Increased Capacity for Premier POS1251PG Oil/Water Separators
The POS EXTPG extender provides additional carbon finishing doubles the condensate processing capacity of the PREMIER POS 1251PG Oil/Water Separator. The single-vessel extender has no moving parts, requires no electricity and little maintenance - only periodic change of the replaceable carbon finishing element is necessary Attachment of the POS EXTPG extender to the POS1251PG Oil/Water Separator is made through simple connection of the outlet port of the POS1251PG and the inlet port of the extender. The extender can be positioned in-line or at a right angle to the POS1251PG to conform to available space. The outlet drain connection is then made to the POS EXTPG. Attachment of the POS EXTPG can be completed while the POS1251PG Oil/Water Separator is installed and filled with condensate.
Features:
- Can be positioned in-line or at a right angle to the POS1251PG to conform to available space
- no electricity and little maintenance
Specifications:
- Model: POS1251PG + POS EXTPG
- Air Compressor Capacity Before POS EXTPG: 750 to 1250 SCFM
- Air Compressor Capacity After POS EXTPG: 625 to 2500 SCFM
- Connection Size:
- Element Type: Carbon Finishing
- Application: Polyglycol, ATF
- Installed Dimensions:
- In-line Installation (with POSEXTPG) : 44" H x 15" W x 73" D
- Corner Installation (with POSEXT): 44" H x 49" W x 39" D
- Weight: 100 lbs
Warranty:
- PREMIER products are warranted to be free from defects in material and workmanship for a period of 12 months from the original date of shipment from the factory. To allow the warranty to be in effect for 12 months from the date of equipment start-up, the Warranty Registration Card must be completed and returned to PREMIER
- The total warranty period can not exceed 15 months from the original date of shipment from the
factory.
- PREMIER'S liability is limited to repair of, refund of purchase price paid for, or replacement in kind at PREMIER'S sole option.
- In no event shall PREMIER be liable or responsible for incidental or consequential damages, even if the possibility of such incidental or consequential damages has been made known to PREMIER
POS_Series_300-2500_SCFM-Specification_Sheet
PREMIER Air Systems manufactures and supplies compressed air treatment equipment that is affordable to purchase and install, and reliable to operate. Our products remove moisture and contaminants from compressed air so it can be used in manufacturing processes and pneumatic applications – in any application where compressed air is used.
Our refrigerated air dryers are ideally suited to compressed air applications that require the air to be clean and dry, while our regenerative dryers are an affordable way to treat compressed air so it becomes nearly contaminant-free. Critical applications and those in extremely cold environments require this. Our compressed air filters protect air system components and pneumatic tools and processes while our drains and accessories help maintain air system functionality.
We have engineered all our equipment to operate efficiently and provide consistent performance in air systems of any size and with any compressor type. They are simple to install and setup, they operate automatically, and they are shipped fully assembled from our factory.
More on Premier Air Systems...
