The PH series provide economical air treatment for critical, moisture-sensitive, compressed air applications. These dryers use desiccant adsorption in a twin-tower design to dry air to –40°F or -80°F dew point depending on the model you select. Heatless regeneration is automatically controlled providing continuous drying operation. This model incorporates many new design features. Upper and lower manifold piping is positioned to permit easy access to all valves and indicators. Pneumatic switching and purge valves are constructed with enhanced seal materials for extended service life. Options are available to allow configuration of all PH dryers to address all applications
Features:
- Pressure Relief Valve
- Moisture Indicator
- Control air line filter
- ASME/CRN stamped vessels
- NEMA 1 control panel
- Tower Pressure Gauges
- Heatless Regeneration
- Ľ” Activated alumina desiccant
- Desiccant FILL and DRAIN ports
- Shipped with desiccant in towers
- NEMA 1 control panel
- Removable stainless steel retainer screens
- Requires no electricity
- 115 Volt electrical
- Automatic Operation
- Reliable controls and Valves
- Twin-tower design
- Power ON light and tower sequence lights
Options:
- High Humidity Alarm - Monitors outlet air stream for high humidity condition, A visual alarm is activated if high humidity exists
- -80°F Dewpoint
- Fail to Shift - Automatically monitors for proper sequencing and operation of valves
and dryer through the controller, A visual alarm is activated in the event of valve-shift failure
- Mounted Filters- Coalescing prefilter protects desiccant media; particulate afterfilter protects
compressed air equipment
- Moisture Load Control - Allows for reduction in purge air consumption by monitoring
moisture load in desiccant media in each tower. Purge valves remain closed and flow valves cycle normally during periods of low air demand (low water loading). Operating cost savings result from a significant reduction in purge air consumption. Tower sensors signal the controller to start tower regeneration sequence when desiccant media becomes saturated.
Specifications:
- Air Compressor Capacity @ -40° F: 120 SCFM
- Air Compressor Capacity @ -80° F: 96 SCFM
- Connection Size: 1" NPT
- Dimensions: 63" H x 40.5" W x 30" D
- Weight: 563 lbs
Warranty:
- PREMIER products are warranted to be free from defects in material and workmanship for a period of 12 months from the original date of shipment from the factory. To allow the warranty to be in effect for 12 months from the date of equipment start-up, the Warranty Registration Card must be completed and returned to PREMIER
- The total warranty period can not exceed 15 months from the original date of shipment from the
factory.
- PREMIER'S liability is limited to repair of, refund of purchase price paid for, or replacement in kind at PREMIER'S sole option.
- In no event shall PREMIER be liable or responsible for incidental or consequential damages, even if the possibility of such incidental or consequential damages has been made known to PREMIER
PH_Series_20-1200_SCFM-Specification_Sheet
See Similar Products:
Dimensions & Weights
|
|
|
| 120 SCFM PH Series Heatless Desiccant Compressed Air Dryer |
63" H x 40.5" W x 30" D |
563 lbs |
Premier Air Systems:
PREMIER Air Systems manufactures and supplies compressed air treatment equipment that is affordable to purchase and install, and reliable to operate. Our products remove moisture and contaminants from compressed air so it can be used in manufacturing processes and pneumatic applications – in any application where compressed air is used.
Our refrigerated air dryers are ideally suited to compressed air applications that require the air to be clean and dry, while our regenerative dryers are an affordable way to treat compressed air so it becomes nearly contaminant-free. Critical applications and those in extremely cold environments require this. Our compressed air filters protect air system components and pneumatic tools and processes while our drains and accessories help maintain air system functionality.
We have engineered all our equipment to operate efficiently and provide consistent performance in air systems of any size and with any compressor type. They are simple to install and setup, they operate automatically, and they are shipped fully assembled from our factory.
More on Premier Air Systems...
General Shipping Information:
- Shipping EstimateView
- Stock Status:View
-
Ships to:
- Ship Method:Truck Freight
- Upgrade Available?
No
Truck Freight Additional Information:
This product is too heavy/large to ship via the small package delivery services (e.g. UPS, FedEx) so it will be sent to you via truck freight. Truck freight is different than standard UPS, FedEx or US Mail in that you will be responsible for carrying the product from the back of the truck into your house (or wherever it's going).
The most important thing to remember about truck freight is that you MUST inspect the package at the time of delivery. If the box has any damage, or if there is any reason for you to be at all concerned about damage, please write "PRODUCT DAMAGED" clearly on the sheet that they ask you to sign. This simply insures that if there is any damage, it will be easy to take care of the problem.
If you are ordering a very large item, please keep in mind that you may need a couple of people to help unload it. Alternatively, most truck freight companies offer additional services to help you move items from the truck into your house. Once we email you the tracking information you can contact the shipper directly to inquire about additional services. You would be responsible for directly paying the truck freight carrier for any additional services.
