We Ship To:      Toll Free: (800) 609-4881
Every Air Compressor

Guaranteed Delivery by Dec. 24 on Items Marked with Snowflakes! More Info. Enjoy our extended Holiday Return Policy on orders placed through Dec 30! More Info.
Please Wait
Changing Image...
Oztec 2.5 HP Gas Backpack Concrete Vibrator Power Unit with Head and Shaft Options - BP - 50a

FREE SHIPPING!

Oztec 2.5 HP Gas Backpack Concrete Vibrator Power Unit with Head and Shaft Options - BP - 50a

SKU #: OZT1049
  • List Price:$1,649.00
  • You Save:$301.00 (18%)
  • Sale Price:$1,348.00 (Varies with options)
  • Shipping:Free

Configure Items Included In This Set
Product Options Price Qty Availability
2.5 HP Gas Backpack Concrete Vibrator Power Unit
FREE SHIPPING!2.5 HP Gas Backpack Concrete Vibrator Power Unit by Oztec
Included 1
Your Total Price:

Save On Additional Pieces:
Product Options Price Qty Availability
1" Steel Vibrator Head
+$132.00
1 - 1/4" Steel Vibrator Head
+$204.00
1 - 1/2" Steel Vibrator Head
+$217.00
1 - 3/4" Steel Vibrator Head
+$257.00
2" Steel Vibrator Head
+$270.00
2 -1/2" Steel Vibrator Head
+$309.00
1 - 7/8" Rubber Vibrator Head
+$350.00
2 - 1/2" Rubber Vibrator Head
+$415.00
1 - 1/4" x 6" Vibrator Short Head
+$185.00
1 - 3/4" x 6" Vibrator Short Head
+$222.00
3/4 x 12" Pencil Head
+$109.00
+$105.00
Rubber Tip for 1" Steel Head
+$36.00
Rubber Tip for 1 - 1/4" Steel Head
+$37.00
Rubber Tip for 1 - 1/2" Steel Head
+$43.00
Rubber Tip for 1 - 3/4" Steel Head
+$46.00
Rubber Tip for 2" Steel Head
+$47.00
Rubber Tip for 2 - 1/2" Steel Head
+$48.00
2' Flexible Shaft
+$100.00
5' Flexible Shaft
+$140.00
7' Flexible Shaft
+$146.00
10' Flexible Shaft
+$188.00
12' Flexible Shaft
+$223.00
14' Flexible Shaft
+$245.00
16' Flexible Shaft
+$322.00
18' Flexible Shaft
+$333.00
21' Flexible Shaft
+$370.00
3' Pencil Shaft
+$118.00
6' Pencil Shaft
+$125.00
9' Pencil Shaft
+$200.00
11' Pencil Shaft
+$225.00
15' Pencil Shaft
+$240.00
20' Pencil Shaft
+$300.00
Your Total Price:

2.5 HP Gas Backpack Concrete Vibrator Power Unit
Powerful, portable and reliable this 2.5 HP Gas Backpack Concrete Vibrator Power Unit, provides ultimate and immediate adaptability on the job. Utilizing a rugged and dependable Honda gasoline engine, coupled to a"speed-up" transmission, vibrator heads develop 12,000 vpm and never drop below 10,000vpm, even in the heaviest low slump concrete loads. (Tested in near 0 slump concrete). This 10,000 - 12,000vpm range is essential for high-quality concrete. Mounted on very comfortable frame, this OZTEC backpack vibrator allows operators incredible maneuverability around the job. Run time with full tank approximately 1 hour plus. This BP-50a is equipped with a totally enclosed rotary throttle allowing the operator to comfortably control the engine while preventing wet concrete from entering and clogging the throttle mechanism.

Features:
  • Quick disconnect system
  • Totally enclosed rotary throttle
  • Kill switch
  • Speed-Up transmission
  • Backpack model
  • Powerful, portable and reliable
  • Mounted on comfortable frame
  • 10,000 - 12,000vpm range
Specifications:
  • Engine: Honda, 4 stroke
  • Horsepower: 2.5 Hp
  • Max Steel Head Size: 2.5"
  • Max Rubber Head: 2.5"
  • Weight: 25 lbs
Warranty
  • Limited Lifetime Warranty
Steel Vibrator Heads
Oztec Vibrator Heads produce the highest amplitude and centrifugal force, generating the largest radius of influence of any heads available. Energy is efficiently transferred from the motor, via the shaft, to the head, which is all eccentric (vibrating the entire head). Whether combined with one of Oztec's electric or gasoline powered motors and choice of flexible shafts the results are exceptional. The Steel Vibrator Heads offers superior consolidation, increased productivity and a process more forgiving of less than perfect vibrating techniques. The benefits, lower cost, higher earnings, superior quality concrete.

Features:
  • Highest amplitude and centrifugal force, generating the largest radius of influence
  • Used with Electric or Gas power units
  • Standard of the industry for use in most applications
Specifications for 1" Steel Vibrator Head:
  • Centrifugal Force: 220 lbs
  • Compaction Rate: 2 - 4 cu.yds/hr
  • Radius of Action: 4"
  • Overall Dimensions: 1" x 13"
Specifications for 1 - 1/4" Steel Vibrator Head:
  • Centrifugal Force: 510 lbs
  • Compaction Rate: 2 - 5 cu.yds/hr
  • Radius of Action: 5"
  • Overall Dimensions: 1 - 1/4" x 13"
Specifications for 1 - 1/2" Steel Vibrator Head:
  • Centrifugal Force: 920 lbs
  • Compaction Rate: 5 - 8 cu.yds/hr
  • Radius of Action: 6"
  • Overall Dimensions: 1 - 1/2" x 14"
Specifications for 1 - 3/4" Steel Vibrator Head:
  • Centrifugal Force: 1200 lbs
  • Compaction Rate: 8 - 16 cu.yds/hr
  • Radius of Action: 9"
  • Overall Dimensions: 1 - 3/4" x 14"
Specifications for 2" Steel Vibrator Head:
  • Centrifugal Force: 1500 lbs
  • Compaction Rate: 12 - 20 cu.yds/hr
  • Radius of Action: 11"
  • Overall Dimensions: 2" x 14"
Specifications for 2 -1/2" Steel Vibrator Head:
  • Centrifugal Force: 1850 lbs
  • Compaction Rate: 23 - 30 cu.yds/hr
  • Radius of Action: 13"
  • Overall Dimensions: 2 - 1/2" x 13"
Rubber Vibrator Heads
Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency "RubberHeads" vibrator heads not only meet DOT non-metal head specifications for protecting coated rebar and expensive forms, but exhibit some very special and unique properties. Rubber Vibrator Heads are highly efficient, "RubberHeads" have urethane dimpled construction that sends strong shock waves off the entire length of the head, with a larger radius of action, producing denser concrete with less voids to patch.

Features:
  • Protective rubber tip
  • Will protect epoxy coated rebar and expensive forms
  • Urethane protective coating
  • Patented high efficiency vibration vector design
  • Inner steel construction
  • Is outstanding in low slump (to "0" slump) concrete
  • Essential in large pours of very stiff concrete
  • Makes concrete denser with less voids to patch
  • Vibrates @ 12,000vpm, never drops below 10,500vpm when lowered deep into low slump concrete
  • Provides Superior Action
  • Is an absolute must for Architectural concrete where cosmetic surfaces are essential.
  • All Oztec vibrators meet or exceed ACI specification # 309
Specifications for 1 - 7/8" Rubber Vibrator Head:
  • Centrifugal Force: 1400 lbs
  • Compaction Rate: 10 - 18 cu.yds/hr
  • Radius of Action: 11"
  • Overall Dimensions: 1 - 7/8" x 14"
Specifications for 2 - 1/2" Rubber Vibrator Head:
  • Centrifugal Force: 1900 lbs
  • Compaction Rate: 14 - 22 cu.yds/hr
  • Radius of Action: 14"
  • Overall Dimensions: 2 - 1/2" x 14"
Specifications for 1 - 1/4" x 6" Vibrator Short Head:
  • Overall Dimensions: 1 - 1/4" x 6"
Specifications for 1 - 3/4" x 6" Vibrator Short Head:
  • Overall Dimensions: 1 - 3/4" x 6"
Rubber Tip for 1" Steel Head
  • Match with 1" Steel Head
  • Rubber tips are factory installed on steel heads
Rubber Tip for 1 - 1/2" Steel Head
  • Match with 1 - 1/2" Steel Head
  • Rubber tips are factory installed on steel heads
Rubber Tip for 1 - 1/4" Steel Head
  • Match with 1 - 1/4" Steel Head
  • Rubber tips are factory installed on steel heads
Rubber Tip for 1 - 3/4" Steel Head
  • Match with 1 - 3/4" Steel Head
  • Rubber tips are factory installed on steel heads
Rubber Tip for 2" Steel Head
  • Match with 2" Steel Head
  • Rubber tips are factory installed on steel heads
Rubber Tip for 2 - 1/2" Steel Head
  • Match with 2 - 1/2" Steel Head
  • Rubber tips are factory installed on steel heads
3/4 x 12" Pencil Head
  • For Fill Cell Block
  • Mild Vibration Pencil Head - High frequency, low amplitude
  • Radius of Action: 3"
  • Centrifugal Force: 155 lbs
  • Compaction Rate: 1 - 3 cu.yds/hr
  • Overall Dimensions: 3/4 x 12"
3/4 x 6" Short Pencil Head
  • For Fill Cell Block
  • Mild Vibration Pencil Head - High frequency, low amplitude
  • Overall Dimensions: 3/4 x 6"
Flexible Shafts
When transmitting power from the power source to the vibrating head, select one of Oztec's flexible shafts. Oztec Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner. This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling. Oztec Flexible Shafts are interchangeable on all Oztec power units, are reversible (doubling their service life), and come supplied with "quick change" adapters. Oztec's "Quick Disconnect" feature, allows shaft removal from the power unit with the twist of a lever. The lightweight and bearing-less coupling allows the job to be done in seconds without any tools. This fitting will not rust or seize.

Features:
  • Cores are made from extra-high carbon steel wires
  • Casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner
  • Rigid enough for driving into the stiffest concrete
  • Shafts are interchangeable on all Oztec power units
  • Reversible
  • Come standard with "quick change" adapters
  • Quick Disconnect feature
Specifications:
  • Use with any Oztec Power Unit
  • Use with any Oztec Steel or Rubber Heads except Pencil Heads
  • Lengths of 2, 5, 7, 10, 14, 16, 18 and 21 ft
Pencil Shafts
  • Use with any Oztec Power Unit
  • For use with Pencil Heads only
  • Lengths 3, 6, 9, 15 and 20 ft


See Similar Products:
Dimensions & Weights
Item:
Dimensions:
Weight:
2.5 HP Gas Backpack Concrete Vibrator Power Unit Unavailable 25 lbs
1" Steel Vibrator Head Unavailable 2 lbs
1 - 1/4" Steel Vibrator Head Unavailable 2 lbs
1 - 1/2" Steel Vibrator Head Unavailable 2 lbs
1 - 3/4" Steel Vibrator Head Unavailable 2 lbs
2" Steel Vibrator Head Unavailable 2 lbs
2 -1/2" Steel Vibrator Head Unavailable 2 lbs
1 - 7/8" Rubber Vibrator Head Unavailable 2 lbs
2 - 1/2" Rubber Vibrator Head Unavailable 2 lbs
1 - 1/4" x 6" Vibrator Short Head Unavailable 2 lbs
1 - 3/4" x 6" Vibrator Short Head Unavailable 2 lbs
3/4 x 12" Pencil Head Unavailable 2 lbs
3/4 x 6" Short Pencil Head Unavailable 2 lbs
Rubber Tip for 1" Steel Head Unavailable 2 lbs
Rubber Tip for 1 - 1/4" Steel Head Unavailable 2 lbs
Rubber Tip for 1 - 1/2" Steel Head Unavailable 2 lbs
Rubber Tip for 1 - 3/4" Steel Head Unavailable 2 lbs
Rubber Tip for 2" Steel Head Unavailable 2 lbs
Rubber Tip for 2 - 1/2" Steel Head Unavailable 2 lbs
2' Flexible Shaft Unavailable 5 lbs
5' Flexible Shaft Unavailable 5 lbs
7' Flexible Shaft Unavailable 10 lbs
10' Flexible Shaft Unavailable 12 lbs
12' Flexible Shaft Unavailable 15 lbs
14' Flexible Shaft Unavailable 20 lbs
16' Flexible Shaft Unavailable 22 lbs
18' Flexible Shaft Unavailable 24 lbs
21' Flexible Shaft Unavailable 26 lbs
3' Pencil Shaft Unavailable 3 lbs
6' Pencil Shaft Unavailable 10 lbs
9' Pencil Shaft Unavailable 13 lbs
11' Pencil Shaft Unavailable 15 lbs
15' Pencil Shaft Unavailable 20 lbs
20' Pencil Shaft Unavailable 25 lbs
Oztec:

Oztec Formed in 1965, Oztec Industries began building it's reputation as a designer and manufacturer of quality construction equipment with the introduction of their first Terrazzo Grinder. Quickly responding to industry needs for a powerful, rugged machine, the Diamond Terrazzo Grinder was developed and patented by Oztec. It "sped" through the grinding process four to five times faster than existing carborundum machines making seemingly impossible, costly projects, possible and profitable. For better maneuverability in small areas, Oztec developed the Single Blade Diamond Grinder, which is still popular today for grinding concrete. Gas and electric ceiling grinders were developed adjustable from seven to twelve feet. Clean-up of the job site was made easier with Oztec's unique "terrazzo cleanup system" which constantly vacuums and pumps waste material outside the job site. Oztec grinders have produced top quality results on thousands of jobs over the years. As a natural extension of their success in finishing terrazzo and concrete surfaces, Oztec Industries began designing and manufacturing quality vibrating equipment to meet the needs of the concrete construction industry. Immediately, the power, quality and reliability of Oztec vibrating equipment gained it a reputation as the best on the market. Oztec's status in the industry remains! Continually improving existing designs and developing new ideas, Oztec provides the right equipment to produce superior concrete on any size job. Oztec's line of fully interchangeable steel and rubber heads, electric and gasoline motors, back packs and portable mounts and flexible shafts are the most powerful, versatile and reliable in the industry. With the development of the patented "RubberHeadTM", Oztec has designed and produced a vibrator head that not only surpasses all the standards for protecting epoxy coated rebar, but is unequaled in consolidating concrete. The "RubberHeadTM" dimple design provides a more powerful radius of action along the entire length of the head, absorbs less vibration than steel and deflects, then pushes forward with high velocity. The "RubberHeadTM" is an absolute must for Architectural and low slump concrete. Oztec Industries continues to explore and develop means of producing superior quality concrete…Oztec Industries…Advanced design…Quality Manufacturing…Superior Results…Oztec...Simply The Best! More on Oztec...
General Shipping Information:
  • Shipping EstimateView
  • Stock Status:View
  • Ships to:    
  • Ship Method:Small Parcel
  • Upgrade Available? No
Small Parcel Additional Information:
This item ships Small Parcel, which means it will be delivered by UPS, FEDEX, DHL or USPS. Several shipping upgrade options are available at an additional charge; you may select your shipping upgrade during checkout if desired.

We do not require an adult signature for deliveries, but please note that the decision to leave your package without a signature is at the discretion of the delivery person. If you want an item left at your doorstep, the best thing to do is leave a note on your door asking the driver to leave your package with "No Signature Required." Be sure to include your name and tracking number on the note.

For Your Reference
OUR SKU # OZT1049
This item is also sometimes listed under the following manufacturer numbers:
BP - 50a

Related Items
Oztec 2' Flexible Shaft - FS02 OZ
Free Shipping!Oztec 2' Flexible Shaft - FS02 OZ$100.00
Oztec 5' Flexible Shaft - FS05 OZ
Free Shipping!Oztec 5' Flexible Shaft - FS05 OZ$140.00
Oztec 7' Flexible Shaft - FS07 OZ
Free Shipping!Oztec 7' Flexible Shaft - FS07 OZ$146.00
Oztec 3' Pencil Shaft - FSP03 OZ
Free Shipping!Oztec 3' Pencil Shaft - FSP03 OZ$118.00
Oztec 6' Pencil Shaft - FSP06 OZ
Free Shipping!Oztec 6' Pencil Shaft - FSP06 OZ$125.00
Oztec 9' Pencil Shaft - FSP09 OZ
Free Shipping!Oztec 9' Pencil Shaft - FSP09 OZ$200.00
Oztec 11' Pencil Shaft - FSP11 OZ
Free Shipping!Oztec 11' Pencil Shaft - FSP11 OZ$225.00
Oztec 15' Pencil Shaft - FSP15 OZ
Free Shipping!Oztec 15' Pencil Shaft - FSP15 OZ$240.00
Oztec 20' Pencil Shaft - FSP20 OZ
Free Shipping!Oztec 20' Pencil Shaft - FSP20 OZ$300.00

Previously Viewed

Call us anytime at (800) 609-4881, Mon-Fri 8-9, Sat and Sun 10-5 EST

Phone orders please mention: 01-X-CSN

Every Air Compressor, a division of CSN Stores LLC, 800 Boylston St, Suite 1600, Boston, MA 02199

Copyright 2002 - 2009 by Every Air Compressor, a division of CSN Stores LLC. All rights reserved. Terms of Use

International: Canada  | United Kingdom