Combicut 3000 10' Slab Saw

The 3000 is perfect for startup fabricating or as a secondary machine and also used for jobsites where many custom cuts are needed. Easy to setup with its forklift pockets and rigid frame and the power to blade is delivered via a 4 HP 220 volt motor. A separate motor controls the travel head for precise and controllable fluid travel speed. The cutting is automatic and the saw drops down to cut miters and bevels. The water is re-circulated via a pump in a collection container so that it is reused. Full control is what you get with the Combicut 3000 10' Slab Saw made by Imer. Independent speed adjustments on the control panel, access to switches and amperage meters are all there at your control. This Imer saw comes complete with water recovery pan, pump, premium blade, 2 extra large roller tables, rear and side fence, laser and a large can of WD-40

Features:

• A computer for automated current control ensures that the speed of cut and motor amperage draw are always at optimal levels
• Gear drive advancement system is most reliable made
• Hoist slots, for easy transport
• The laser cutting guide is easy to use, just mark the line of your cut on the slab, line it up with the laser, clamp it down and cut
• The travel bar is built like a suspension bridge
• Cut within a 1/32" over 10ft.
• Serpentine belt reduction system
• hydraulic control lever makes tilting to 45° no problem
• The saw head also has the ability to chop up and down, plunge cuts up to 4 3/4" are possible.
• Extremely friendly, new operators can be trained up to cutting speed in an hour or two
• Comes in a crate 99% assembled

Application:

• Built for the start-up shop, or full size shop needing on site fabrication and a versatile complement to their existing shop saw

Included with Saw

• Plunge cut
• Full control panel
• Protractor
• Roller table
• Rear adjustable fence
• Laser sight
• Lubricant (1 gal WD-40)

Specifications:

• Blade Diameter: 14"
• Blade Shaft Diameter: 1"
• Max. Cutting Length: 10'
• Max. Cutting Depth 90/45 °: 4-3/4" / 2-1/3"
• Motor: Electric 220v, 20 amp, 1 phase
• Horsepower: 4 hp
• Motor Speed / Blade Speed: 2,850 r.p.m. / 2,250 r.p.m.
• Water Tub Capacity: 25 Gal
• Water Pump Flow: 4 g.p.m.
• Noise Level:78 db(A) - real quiet
• Weight: 1500 lbs
• Overall Dimensions: 68" H x 43" W x 161" D

Warranty:

• 1 Year limited warranty from date of purchase

Combi3000_Owners_Manual