Rugged and portable, the Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using 0.030-0.035" flux cored wire. For greater versatility, upgrade the Handler 125 with the optional MIG conversion kit for welding with .023-.030" solid wire and gas shielding.
Handler 125 Features:
- Includes: Comfortable 8' H-9B gun with liner for 0.023-.035" wire, 0.030" contact tips, 10" work cable with clamp, sample spool of 0.030" self-shielding flux cored wire, spool shaft to accommodate 4" spools and a power cord with plug
- Welds 20 gauge up to 3/16" steel with flux cored wire
- Proven built-in wire feeder with quick-release drive roll tension lever
- Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding
- Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness
- Dual groove drive rolls make it easy to switch between 0.023/0.025" and 0.030 -0.035" wire
- Self-resetting thermal overload and motor protection
- Includes: Dual-gauge adjustable regulator, 5' gas hose, solenoid gas valve with internal gas connections, 3 contact tips-0.024", 2lbs solid 0.024" ER70S-6 wire and complete installation instructions
MIG Gas Conversion Kit Features:
- Includes: Dual-gauge adjustable regulator, 5' gas hose, solenoid gas valve with internal gas connections, 3 contact tips-0.024", 2lbs solid 0.024" ER70S-6 wire and complete installation instructions
- Easily upgrades the Handler 125 to weld with solid wire and mixed shielding gas
- Minimum material weld: 22 gauge
Handler 125 Specifications:
- Rated Output at 20% Duty Cycle: 90 A at 19 VDC and 63 A at 21 VDC (CSA Rating)
- Current Range: 30-125 A
- Max. Open-Circuit Voltage: 29 V
- Wire Feed Speed Range: 0-415 IPM and 0-500 IPM at no load
- Use C-25 gas (75% argon/25% CO2) on 22 gauge - 1/8" steel for a cleaner weld with less spatter
- Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel
- Power: CV, DC, 1 Phase
- Processes: Flux Cored (FCAW), MIG (GMAW)
- Material Thickness Welds 20 gauge up to 3/16"
- Skill Level: Low
Manufacturer Warranty: 5 years
Handler_125
Hobart Welders' Warranty
MIG Gas Conversion Kit for the Handler 125 Wire-Feed Welder
This easy-to-install kit upgrades the Handler 125 to weld with solid wire and mixed shielding gas. You will be able to weld thinner metal (22 gauge) with less splatter and a cleaner bead
We Now Ship to Canada!
Ships to Canada
