With 24 inch maximum grinding width, this 11 HP Propane Gas Dual Head Surface Grinder is equipped with the following standard features. Welded, unitized frame, a dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system. It also has adjustable operator handle and wheel heights and a 3 inch diameter vacuum attachment port with cover. This General Equipment unit includes a 20 lb industrial type Propane tank, hose, coupler and accessory kit, as well as safety and dust shield assembly kit which is not installed.
Features:
- Complete with 20 lb industrial type Propane tank, hose, coupler and accessory kit
- Conversion for use with Propane
- Oil alert and dual element air cleaner
- Welded, unitized steel frame
- Quick-change
- Dual counter rotating multi-accessory discs with elastomeric type gimbal head system
- Twin V-belt and sealed spur gear reduction
- Centralized lubrication system
- Integral V-belt tension adjustment mechanism
- Foldable operator handle, adjustable for height
- Safety and dust shield assembly kit (not installed)
- 3 inch diameter vacuum attachment port with cover
Specifications:
- Engine: Honda, GXV340, 4-Cycle gasoline converted to propane
- Horse Power: 11 HP
- RPM: 3600
- Starting Method: ting Method: Mechanical rewind/electric starter optional
- Maximum Grinding Width: 24"
- Structure: Unitized, welded steel plate
- Bearings: High capacity, Zerk® type fittings
- Disc Rotation Speed: 250 RPM
- Drive System: Dual B Series, V-belt/pully and spur gear reduction
- Multi-Accessory Disc: Two each, aluminum, counter- rotating
- Weight: 370 lbs
- Overall Dimensions: 47"H x 33"W x 57"D
Warranty:
SG24-Series_Operator_Manual
Safety and Dust Shield Assembly Kit, Replacement for SG24 Series
- Safety and dust shield assembly kit, replacement
- Encloses multi-accessory options to enhance vacuum operation and/or help contain loose material
- Included as a standard accessory with SG24 Series Surface Grinders
- Grinder Not Included
Grinding Stone, Extra Coarse C06 Grade
- For general grinding, removing trowel marks, high spots and rough sections on concrete surfaces
- Includes plastic mounting wedge
- 6 units: SG24 Series, 3 units: SG12 Series, each
Grinding Stone, Extra Coarse C10 Grade
- For general grinding, removing trowel marks, high spots and rough sections on concrete surfaces
- Includes plastic mounting wedge
- 6 units: SG24 Series, 3 units: SG12 Series, each
Grinding Stone, Extra Coarse C24 Grade
- For finer grinding on concrete, rough grinding on terrazzo and other stone surfaces
- Includes plastic mounting wedge
- 6 units: SG24 Series, 3 units: SG12 Series, each
Grinding Stone, Extra Coarse C80 Grade
- For polishing concrete and medium grinding on terrazzo surfaces
- Includes plastic mounting wedge
- 6 units: SG24 Series, 3 units: SG12 Series, each
Grinding Stone, Extra Coarse C120 Grade
- For final polishing on terrazzo surfaces
- Includes plastic mounting wedge
- 6 units: SG24 Series, 3 units: SG12 Series, each
Diam-A-Tach Diamond Segment Grinding System Block for Softest Matrix Composition
- 40 to 50 grit, purple identification color, stamped “P” on pin shank, softest matrix composition
- DIAM-A-TACH® Diamond Segment Grinding System block includes: block body
- Three replaceable diamond segment assemblies and stainless steel retaining pins
- Used for removing concrete and a wide variety of thin film coatings including: mastics, epoxies, urethanes, adhesives, sealers, paints, etc.
- 2.4 square inch total segment area per block
- Complete with plastic mounting wedge
- Three blocks required for SG12 Series and six blocks required for SG24 Series
- Direct mounts to all popular brands of single and dual head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Block for Softer Matrix Composition
- 40 to 50 grit, yellow identification color, stamped “Y” on pin shank, softer matrix composition, for many general purpose applications
- DIAM-A-TACH® Diamond Segment Grinding System block includes: block body
- Three replaceable diamond segment assemblies and stainless steel retaining pins
- Used for removing concrete and a wide variety of thin film coatings including: mastics, epoxies, urethanes, adhesives, sealers, paints, etc.
- 2.4 square inch total segment area per block
- Complete with plastic mounting wedge
- Three blocks required for SG12 Series and six blocks required for SG24 Series
- Direct mounts to all popular brands of single and dual head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Block for Medium Matrix Composition
- 40 to 50 grit, black identification color, stamped “B” on pin shank, medium matrix composition, for use on epoxy mortar (abrasive) or more abrasive materials
- DIAM-A-TACH® Diamond Segment Grinding System block includes: block body
- Three replaceable diamond segment assemblies and stainless steel retaining pins
- Used for removing concrete and a wide variety of thin film coatings including: mastics, epoxies, urethanes, adhesives, sealers, paints, etc.
- 2.4 square inch total segment area per block
- Complete with plastic mounting wedge
- Three blocks required for SG12 Series and six blocks required for SG24 Series
- Direct mounts to all popular brands of single and dual head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Block for Green Type Matrix Composition
- 40 to 50 grit, green identification color, stamped “G” on pin shank, for use on green type (less than 2 day old) or extremely abrasive concrete/asphalt
- DIAM-A-TACH® Diamond Segment Grinding System block includes: block body
- Three replaceable diamond segment assemblies and stainless steel retaining pins
- Used for removing concrete and a wide variety of thin film coatings including: mastics, epoxies, urethanes, adhesives, sealers, paints, etc.
- 2.4 square inch total segment area per block
- Complete with plastic mounting wedge
- Three blocks required for SG12 Series and six blocks required for SG24 Series
- Direct mounts to all popular brands of single and dual head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Block for Finish Grinding Applications
- 100 to 120 grit, red identification color, stamped “R” on pin shank, for use on finish grinding (polishing) applications requiring minimal swirl marks
- DIAM-A-TACH® Diamond Segment Grinding System block includes: block body
- Three replaceable diamond segment assemblies and stainless steel retaining pins
- Used for removing concrete and a wide variety of thin film coatings including: mastics, epoxies, urethanes, adhesives, sealers, paints, etc.
- 2.4 square inch total segment area per block
- Complete with plastic mounting wedge
- Three blocks required for SG12 Series and six blocks required for SG24 Series
- Direct mounts to all popular brands of single and dual head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Kit Block for Purple Identification Color
- DIAM-A-TACH® DIAMOND SEGMENT GRINDING SYSTEM KIT, purple identification color, for aggressive grinding use
- For Use with SG24
- DIAM-A-TACH® diamond segment grinding system kits include:14.2/7.1 square inches total segment area for grinding us
- SG24-2100 Series DIAM-ATACH ® blocks; 6/3 each, SG24-1800 mounting wedges; 6/3 each
replacement stainless steel retaining pins; 6/3 each, SG24-2101-030 replacement O-rings, installation hammer, drive punch and extra heavy duty, steel tool box
- Direct mounts to all popular brands of dual and single head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Kit Block for Yellow Identification Color
- DIAM-A-TACH® DIAMOND SEGMENT GRINDING SYSTEM KIT, yellow identification color, for most
general purpose uses
- For Use with SG24
- DIAM-A-TACH® diamond segment grinding system kits include:14.2/7.1 square inches total segment area for grinding use
- SG24-2100 Series DIAM-ATACH ® blocks; 6/3 each, SG24-1800 mounting wedges; 6/3 each, replacement stainless steel retaining pins; 6/3 each, SG24-2101-030 replacement O-rings, installation hammer, drive punch and extra heavy duty, steel tool box
- Direct mounts to all popular brands of dual and single head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Kit Block for Black Identification Color
- DIAM-A-TACH® DIAMOND SEGMENT GRINDING SYSTEM KIT, black identification color, for use on
epoxy mortar (abrasive) or more abrasive (eg: asphalt) materials
- For Use with SG24
- DIAM-A-TACH® diamond segment grinding system kits include:14.2/7.1 square inches total segment area for grinding use
- SG24-2100 Series DIAM-ATACH ® blocks; 6/3 each, SG24-1800 mounting wedges; 6/3 each, replacement stainless steel retaining pins; 6/3 each, SG24-2101-030 replacement O-rings, installation hammer, drive punch and extra heavy duty, steel tool box
- Direct mounts to all popular brands of dual and single head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Kit Block for Green Identification Color
DIAM-A-TACH® DIAMOND SEGMENT GRINDING SYSTEM KIT, green identification color, for use on
green type or extremely abrasive concrete/asphalt
- For Use with SG24
- DIAM-A-TACH® diamond segment grinding system kits include:14.2/7.1 square inches total segment area for grinding use
- SG24-2100 Series DIAM-ATACH ® blocks; 6/3 each, SG24-1800 mounting wedges; 6/3 each, replacement stainless steel retaining pins; 6/3 each, SG24-2101-030 replacement O-rings, installation hammer, drive punch and extra heavy duty, steel tool box
- Direct mounts to all popular brands of dual and single head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
Diam-A-Tach Diamond Segment Grinding System Kit Block for Red Identification Color
DIAM-A-TACH® DIAMOND SEGMENT GRINDING SYSTEM KIT, red identification color, for use on finish
grinding (polishing) applications requiring minimal swirl marks
- For Use with SG24
- DIAM-A-TACH® diamond segment grinding system kits include:14.2/7.1 square inches total segment area for grinding use
- SG24-2100 Series DIAM-ATACH ® blocks; 6/3 each, SG24-1800 mounting wedges; 6/3 each, replacement stainless steel retaining pins; 6/3 each, SG24-2101-030 replacement O-rings, installation hammer, drive punch and extra heavy duty, steel tool box
- Direct mounts to all popular brands of dual and single head surface grinders
- Select matrix configuration according to productivity and service life desired
- Hardness of aggregate and/or material(s) will affect productivity rates, finish and service life
General Equipment offers the most respected line of portable and mobile hole digging equipment available to the construction marketplace. The line includes hand-held, hydraulically powered and towable hole diggers and a wide variety of earth auger product lines up to 36 inch diameter.
General Equipment offers the most complete line of confined space and positive pressure type ventilation products designed for use in non-hazardous and hazardous locations. Choose from AC and DC electric, or gasoline power sources along with a complete line of ducts and related storage accessories.
General Equipment offers the most innovative and productive line of surface preparation equipment, including planers, grinders, random crack saws, floor covering strippers and pneumatically powered demolition tools. Choose from electric, pneumatic and gasoline power sources along with a wide variety of job specific attachments and accessories.
Decisions are no longer made with just regional or national considerations. General Equipment is no longer sheltered by oceans. Their products compete openly in a world market and continue to build its reputation on a global basis by never losing sight of those basic concepts that have been the foundation of our success. The demands of a world market have challenged us to continue with the same tradition and commitment originally made almost 50 years ago, on a small family farm in Southern Minnesota.
More on General Equipment...
